Last but not least, the trailing edge was drilled with its associated wedge-size spar cap sandwiched in between.
posted by Unknown at 1:13 AM
Monday, September 10, 2007
Previous Posts
- Note the limited clecoes in place though the rear ...
- The upper rear spar was being drilled finally.
- Driling the nose ribs with #30 bit except for the ...
- Done.
- Now drilling the upper main rib from fore to aft...
- Thumb up for another good job.
- Confirm trice.
- Confirm twice.
- Confirm once.
- Drilling on the upper front spar began after check...
0 Comments:
Post a Comment
<< Home