Next, i drilled the nose /leading rib
holes using #40 drill bit.
holes using #40 drill bit.
posted by Unknown at 1:11 AM
Wednesday, December 02, 2009
Previous Posts
- 24 Nov 2009.It has been awhile since i last work...
- Yes, finally I have finished drilling one set of f...
- Last but not least, the trailing edge was drilled ...
- Note the limited clecoes in place though the rear ...
- The upper rear spar was being drilled finally.
- Driling the nose ribs with #30 bit except for the ...
- Done.
- Now drilling the upper main rib from fore to aft...
- Thumb up for another good job.
- Confirm trice.
0 Comments:
Post a Comment
<< Home