Mark and drill the spar web/inspection hole doubler rivet holes with #40 bit.
posted by Unknown at 1:36 AM
Friday, April 06, 2007
Previous Posts
- Drill the inspection hole cover mounting screw hol...
- With the doubler clamped in position, #40 bit is u...
- Duplicate the process for the other inspection hol...
- Mark locations for the inspection hole doubler riv...
- Drilling the nose ribs with #30 bit except the hol...
- Tadaaah!!!...
- Here, i am seen drilling the aft rib holes with #3...
- Here, i am seen drilling the aft rib holes with #3...
- The end result after lots of drilling..
0 Comments:
Post a Comment
<< Home