Front spar rivet holes fully drilled. Note the flap was upside dow
n at this point of time.
n at this point of time.
posted by Unknown at 12:54 AM
Monday, September 10, 2007
Previous Posts
- Oh yes, the reason i have abandoned my wing projec...
- With bolt spacers in place using An3 bolts, wash...
- After a laborious sawing...
- Making the required bolt spacers (1/2" and 5/8" t...
- Checking that the flap was true and plumb before d...
- All main and nose ribs clecoed in position onto th...
- Here, the rib/spar rivet holes on Rib Pair A/C wit...
- Here, the rib/spar rivet holes were drilled with #...
- Note, even the initial 2 index pre-punched holes w...
- Drilling additional 4 holes with #30 bit on the de...
0 Comments:
Post a Comment
<< Home