After finished riveting the lower servo tab.
posted by Unknown at 7:30 AM
Friday, May 25, 2007
Previous Posts
- Blind rivet the lower skin to the aft rib and also...
- Almost finishing riveting the spar flange ..
- Rivet the lower spar flange to the skin.
- The completed servo tab with the horn in place.
- Hand rivet squeezing the trailing edge of the serv...
- Close up view of the other outermost nose rib afte...
- The result...
- Hand rivet squeezing the outermost nose ribs.
- Finishing up blind riveting the lower nose ribs..
- With epoxy glue applied in between the servo tab t...
0 Comments:
Post a Comment
<< Home