Giving a big thumb up after finished drilling the trailing edge and upsized the rivet hole
of the nose rib to #30.
of the nose rib to #30.
posted by Unknown at 1:24 AM
Wednesday, December 02, 2009
Previous Posts
- Finally, drilling the trailing edge of the flap. P...
- Here, i am seen using an L-shaped straight edge ...
- Result of drilling the main rib/nose rib and forwa...
- Here, i drilled the main rib of the starboard flap.
- Next, i drilled the nose /leading rib holes using ...
- 24 Nov 2009.It has been awhile since i last work...
- Yes, finally I have finished drilling one set of f...
- Last but not least, the trailing edge was drilled ...
- Note the limited clecoes in place though the rear ...
- The upper rear spar was being drilled finally.
0 Comments:
Post a Comment
<< Home